380V 50Hz Double Rotor Hammer Crusher Mill For Materials Processing

HC1200*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills, the dual-rotor hammer crusher is mainly used in materials processing in clay brick making plant or other minerals processing industries.

Technical Parameters of HC1200*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills

Application case of Twin-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills in Brick production line.

Questions about HC1200*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills

1. The Power is 320kw, this power is for 2 motors or only one?

           A: 320kw=160kw+160kw, there are 2 motors;

2. The o2 electric motors have the same power, or there is one big, and the second it’s smaller?

        A:the 2 motors have the same power.

3. The brand of of electric motors?

          A: Brand of motors is Anhui Liuan, China brand with good quality.

4. The hammer head are the same in the machine, or there is 02 models?

          A:the hammer head are same in the machine.

5. The number of hammer in the machine? And weight?

          A: 36 hammers=18 hammers+18 hammers in the machine, located in the top and below of the machine.

              Weight is 22kg per hammer.

6. The life of head hammer?

           A: if working time is 8 hours oer day, life of the hammer is 3-8 moths,according to the different raw materials.

7. The machine is delivered with electrical cabinet?

         A: the machine is delivered without electrical cabinet, but with cables for 380v.

8. What is the imput granulometry required for the machine to work perfectly? And what is the final granulometry the machine can give?

         A:input diameter of raw materials is less 250mm, 90% output is less than 3mm, 10% output is 3-5mm.

9. When the raw materials is wet, the machine can crush it wihout sticking?

         A: Water content not more than 8.5%, raw materiasl will not stick on the machine.

10. The brand of bearings of machine?

         A: bearings brand is Wafangdian, good quality in China.