HC800*2A Dual Rotor Hammer Crusher Machine Mill For Materials Processing
Dual Rotor Hammer Crusher Machine
,Materials Processing Hammer Crusher Machine
,Dual Rotor Hammer Crusher Mill
HC800*2A Dual-Rotor Hammer Crusher For Materials Processing Equipment Hammer Mills
HC800*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills, the dual-rotor hammer crusher is mainly used in materials processing in clay brick making plant or other minerals processing industries.
Specifications of HC800*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills
| Item | Unit | HC800*2A |
| Output | t/h | 70-90 |
| Materials before crushing | mm | ≤250 |
| Materials after crushed | mm | ≤3 |
| Power | Kw | 180kw |
| Weight | Kg | 10,000 |
| Length | mm | 4,234 |
| Width | mm | 1,920 |
| Height | mm | 4,959 |
Application case of Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills in Brick production line.
Questions about HC800*2A Dual-Rotor Hammer Crusher for Materials Processing Equipment Primary Crusher Hammer Mills
- The Power is 180kw, this power is for 2 motors or only one?
A: 180kw=90kw+90kw, there are 2 motors;
- The 2 electric motors have the same power, or there is one big, and the second it’s smaller?
A:the 2 motors have the same power.
- The brand of of electric motors?
A: Brand of motors is Anhui Liuan, China brand with good quality.
- The hammer head are the same in the machine, or there is 02 models?
A:the hammer head are same in the machine.
- The number of hammer in the machine? And weight?
A: 36 hammers=18 hammers+18 hammers in the machine, located in the top and below of the machine.
Weight is 11kg per hammer.
- The life of head hammer?
A: if working time is 8 hours oer day, life of the hammer is 3-8 moths,according to the different raw materials.
- The machine is delivered with electrical cabinets?
A: the machine is delivered without electrical cabinets, but with cables for 380v.
- What is the imput granulometry required for the machine to work at the best ? And what is the final granulometry the machine can give?
A:input dia. of raw materials is less 250mm, 90% output is less than 3mm, 10% output is 3-5mm.
- When the raw materials is wet, the machine can crush it without sticking?
A: Water content not more than 8.5%, raw materials will not stick on the machine.
- The brand of bearings of machine?
A: bearings brand is Wafangdian, good quality in China.
